Disclaimer: We may receive a commission for products purchased through some links in this article.
Best Boat Gas Tanks Reviewed
The beauty of open seas and the breeze when you are out on a boat enjoying yourself is one to behold.
When setting sail to the open waters, you will expect to have a fun and relaxing time with your company.
The cool breeze will take your worries away and give you the perfect boating (and photoshoot) experience. The fun in boating is riding the silent waves in your light summer clothing as the boat rocks peacefully.
Disrupting these moments over gas unavailability will most likely spoil the boating adventure and ruin your plans. There is no fun in getting stranded out in the waters. Believe us when we say it’s worth investing in one of the best boat gas tanks for your next outing.
Normally, most boats are fitted with a gas tank of up to 16-gallon capacity which may not be sufficient for your water adventures. Sometimes this may not be sufficient for your boating trips.
Without an accurate estimation of the gas gauge, you can get caught up in such situations. Therefore, you should always prepare yourself beforehand by having alternative gas tank solutions within reach.
Poor quality gas tanks can also be subject to fast deterioration and frequent damages. Having a reliable gas tank and fuel line in your boat will give you the confidence you need when setting out on your boating experience.
Inspecting the type of material and its resistance to frequent movements and the raging waters is a good place to start when searching for quality gas tanks.
Additionally, there is always the option of using portable tank(s) to help you sustain the trips into the waters by swapping them when one is low on fuel. With the various varieties of portable gas tanks in the market, you need to consider different factors to get a suitable one carefully.
Checking out the types of tank material, capacity, and storage conditions will guide you into a suitable choice. Due to its high volatility, you need to investigate the health and safety requirements of the additional gas tank before having it on board.
It may be the perfect example of a good servant but a bad master. Consider additional accessories that will help you to maintain the safety requirements in the boat. With these resources and requirements, you can enjoy an extra boating ride in the waters with no worries.
Check Out Our Favorite Boat Gas Tank
Top Boat Gas Tank Comparison Chart
Best Boat Gas Tank
As the name suggests, these tanks are best fitted on the top side of the boat.
It is rectangular and is 24.5” long × 18.1” wide × 11.5” high for the 14-gallon tank. It comes in various capacities of up to 24 gallons. Its adaptability to corrosive fuel types like ethanol fuels has made it a must-have for most bats.
You can use it to store ethanol, alcohol, or recreational gasoline fuel.
It has a low profile; you can easily store it in the boat and swap the fuel tank easily when need be. It is impossible to talk about the Moeller marine topside fuel tanks without praising its ease in approximating fuel from the visible cap that acts as a fuel gauge.
Its functionality is aided by the vent, which lets off the pressure building in the gas tank, thus promoting proper functionality. The Marine topside tank is in various colors, white or red. Though it is an insignificant characteristic, its style and fit to your boating structure will elevate its feel and structure during your escapades.
Its design is perfect for smaller boats. Since it is made from UV stabilized resin, it is resistant, sturdy, and rotationally molded, thus fulfilling the safety requirements as pressure does not build in the tank when in motion.
As a rule of thumb, volatile fluids should not be agitated for lengthy periods. Thus, its provision of rolling over makes storage easier.
Generally, this fuel tank’s performance is second to none. It checks most boxes in the gas tank requirements of the boating experience. Its price range goes hand in hand with its performance; you can expect to pay at least $299.98 for these gas tanks.
This gas tank’s most visible advantage is in the ease of carrying it.
It is fitted with a handle and an integral fuel gauge which will help you and the crew members easily move or swap it.
The fuel gauge keeps you prepared to monitor the fuel and know when you need to top up. Though you can challenge its accuracy, it is still a useful component as it gives you direction.
This 3.2-gallon capacity shows its small size that is highly portable and can be used onboard. With its adherence to the EPA requirements of portable fuel tanks, you can be sure of your safety when using these fuel tanks.
The fuel line that comes as part of the fuel tank makes it easy to be used on the top side. It, therefore, provides a simple connection from the fuel tank to the engine.
The control and cap tightness you get from these tanks assure you of your gas and boat safety. It is challenging to have cap leaks due to the installed diurnal caps.
The durability of these materials usually boils down to the type of plastic or resin used when manufacturing the fuel tanks. This portable marine gas tank is built using high-strength materials with UV protection. Thus, you can count on its durability.
If you need durability in higher capacities, then the Duramax flo’ n go rolling boat gas tank is the one for you.
It is a 14-gallon tank with its pump and several functional valves and seals that aid its functionality. It also has wheels that ease its transportation due to its large capacity and shape.
As a result, the tank ventilation and stability increase.
Due to the wheel provision, you will mostly find it stored in an upright position where you can use the pump to start, restart, or stop the fuel.
It is an auto pump thus can control the flow of gas into the engine. The gas tank has a handle at the top that helps handle it: it is easy to carry or wheel this heavy-duty gas tank around.
It is made of high-density propylene that is resistant to corrosion, dent, and dust. It characterizes it as an exceptionally durable gas tank used for farm, rural, or marine purposes.
It is relatively cheap for a large gas tank, where you can get it at approximately $118 – which is quite a bargain.
The presence of the fuel lines and the gas pump handle make it perfect for outboard engines. It is easier to connect with the outboard engine with the tank on board.
You can also choose to have these tanks fuel your regular boat gas tank using the pump. This pump can sometimes be affected by airlocks thus can be difficult to operate. To manage such situations, ensure you rime before using it.
It is also an environmentally friendly gas tank as it has self-vents that prevent pollution by containing the pent-up pressures when open. On the flip side, it is challenging to completely drain these tanks due to the shape and design of the tank bottom. You will always have to flip it upside down to drain the remaining fuel in the tank.
This 3-gallon gas tank is perfect for smaller boats because of its small capacity and size.
Its small size of 14” x 9.5” x 10.2” makes it suitable for an outboard engine where you can use your back hole motor connectors, which come as a unit.
It is easier to connect this tank to your engine, especially in the tiny spaces from the outboard motor holes using the connectors into the engine.
The connector also has fittings that ensure that the fluid flow from the tank to the engine is seamless. The provision of the handle makes it easier to carry and move it around. Its tight cap makes it free from leakages and environmentally friendly.
It is a lightweight gas tank made from strong UC polyethylene, making it highly resistant to corrosions, cracks, or rust.
Hence, it is a durable gas tank for your tiny machines. Its rounded structure also makes it quite easy to store in the boat, and you can get it for a mere $99.99.
This 12-gallon beast is primarily used in the marine due to its reliability and capacity.
It is the perfect backup plan if your regular tank runs out of fuel. This high-density gas tank’s large capacity is evident due to its enormous size.
Its two-way vented cap is centered in the middle of the tank where the fuel gauge is.
The fuel gauge mostly relies on the line of sight, which can sometimes give inaccurate information as you can only estimate the actual level of the tank. However, you can still plan adequately using these readings. The fuel sight gauge combines as a fuel pick-up to connect your fuel line into the engine.
With this large capacity, you can only expect to use this tank while onboard. Thus, it is perfect for outboard engines. Larger boats can benefit significantly from these tanks.
For as little as $149.99, you can get these fuel tanks. The bold red rectangular structure will give you prolonged and reliable service. Even though it is difficult to transport, carry, or store, you will enjoy its performance out in the waters.
Top Boat Gas Tank Features To Consider
Choosing a suitable gas tank is highly dependent on your engine’s consumption, size of the boat, and ease of operation.
Riding these boats usually requires some form of experience. Thus you need to consult when you need to buy your gas tank, whether the regular tank or a portable gas tank.
Consider the motor’s performance and ease of refueling your engine. Some gas tanks will have wheels, thus easing the tank’s movement on and off the boat.
For the outboard engine, it becomes much easier as you can easily refuel the tank from the comfort of the boat. Hauling your gas tank from and into the water can be a tedious task.
You need to consider the amount of lifting and shoving you are willing to do during your boating trip.
You should also consider the safety and health requirements of the gas tank. It needs to have passed the EPA requirements to assure you of its safety while in use.
One factor that has changed over the years is the venting system. You need to ensure that the gas tank has a functioning venting system to build and release pressure when need be.
Currently, the gas tanks will not release any built pressure below 5 PSI. Instead, the tank will swell. It might be a concern for you if you do not understand these rules.
However, ensure you learn more about the venting systems and the required manufacturing laws to be abreast of the tank’s behavior.
It would be best also to learn how to store your gas tanks while boating to avoid contamination or tampering.
Take note of the special design and structure of the tanks. It is a design that aligns with the tank’s safety requirements
Finding the Right Size for your Boat
You need to ensure that the gas tank size can fit in your boat without any limitations.
Checking and counter checking your requirements will always help you get a suitable tank. Do not rush to get a 12-gallon gas tank, yet your boat’s tank has a 3-gallon capacity and limited space for storage.
Your engine’s consumption might also be lower; thus, having a larger tank may prove futile as you will have to squeeze and fit all your trip needs in the tiny space.
It is up to you to choose how you will facilitate your boating experience at the end of the day. Ensure you make the right choices at the right time. When out in the waters, you can only take too many risks lest you risk it all!